<

Page 1 of 1

>
3M Petrifilm Aqua Plates

3M

3M™ Petrifilm™ Aqua Plates are sample-ready plates that replace conventional agar, petri dishes, media pads and disposable filter funnels used in the microbial testing of water. Each plate contains a water-soluble gelling agent, nutrients and ...

Chlorine, Hardness, Iron and pH Water Test Kit

Hach

The Chlorine, Hardness, Iron and pH Water Test Kit uses titration and color disk methods to test 4 parameters of water quality. The testing kit includes 6 reagents, bottles, color discs, comparator box, viewing tubes, measuring tube ...

DelAgua Bacteriological Kit No 1

DelAgua

Originally designed for UNICEF, this kit provides information about the safety of water in difficult situations or remote areas where laboratory facilities do not exist. It includes the Oxfam-DelAgua Single Incubator Water Testing Kit which was ...

DelAgua Bacteriological Kit No 2

DelAgua

The DelAgua Bacteriological Kit No. 2 provides information about the safety of water in difficult situations or remote areas where laboratory facilities do not exist. It includes the Oxfam-DelAgua Dual Incubator Water Testing Kit which was ...

DelAgua Bacteriological Kit No 3

DelAgua

This water testing kits is designed for scenarios in which a broad physicochemical test suite is needed, but only fecal coliforms are of interest.

The kit includes the Oxfam-DelAgua Single Incubator which was designed for microbiological water ...

DelAgua Benchtop Incubator

DelAgua

The Single Incubator Benchtop Kit is designed for microbiological water monitoring via detection of indicator organisms for E. coli, cholera, salmonella and other fecal waterborne pathogens.

The Benchtop Kit, for use where the power supply is ...

DelAgua

The Oxfam-DelAgua Dual Incubator Kit is designed for microbiological water monitoring via detection of indicator organisms (fecal coliforms) for E. coli, cholera, salmonella and other fecal waterborne pathogens. The kit can be run from a DC ...

DelAgua

The Oxfam-DelAgua Single Incubator Kit is designed for microbiological water monitoring via detection of indicator organisms (fecal coliforms) for E. coli, cholera, salmonella and other fecal water-borne pathogens. The kit allows for complete ...

TWAD Board

The Field Water Testing Kit developed by TWAD Board is a simple, user-friendly and cost-effective kit that can perform the following 13 chemical tests:

  • pH
  • alkalinity
  • hardness
  • chloride
  • TDS
  • fluoride
  • iron
  • ammonia
  • nitrite
  • ...

Hach

The Hardness, Iron and pH Test Kit measures water quality using a color disc, a color comparator (Iron, pH) and a drop-count titrator (Hardness). The kit is portable, fits into a protective carrying case and is designed for field testing of ...

TARAEnviro

The Standard Jal-TARA Kit is designed to perform basic tests to ensure water potability. The kit can test for the following 11 physical, chemical and biological parameters:

-pH -Temperature -Turbidity -Hardness -Chloride -Fluoride -Iron ...

Wagtech WTD

The CP1000 Physico Chemical Kit is designed for testing a range of physical water quality parameters, and performing the analysis of over 40 different chemical parameters. The testing parameters include:

  • Conductivity
  • Turbidity
  • TDS
  • pH
  • ...

ELE International

The Paqualab is a portable testing system for monitoring key drinking water parameters on site. The system is capable of performing chemical, biological and physical tests, including:

-pH -Temperature -Conductivity -TDS, -Turbidity -Chlorine ...

Indian Institute of Technology - Bombay

The Polysensor is a low-cost and easy-to-use testing kit for measuring levels of water impurities. The instrument is battery operated and portable for field use.

The system uses the basic operating principle of potentiometry. It provides ...

Palintest Ltd

The Potakit+ Basic Portable Water Quality Laboratory is a portable testing laboratory designed to assess the suitability of drinking water on site, even in remote areas. The Potakit+ tests for the following microbiological and physicochemical ...

TARAEnviro

The Standard Jal-TARA Kit is designed to perform basic tests to ensure water potability. The kit can test for the following 14 physical, chemical and biological parameters:

-pH -Temperature -Turbidity -Hardness -Arsenic -Chloride -Fluoride ...

Sandberg & Schneidewind

The TRAWAS Portable Water Testing Kit is a complete microbiological laboratory for testing drinking, recreational and waste water. The TRAWAS Complete Kit (No. 180.108) is a complete TRAWAS kit which includes a digital pH/Conductivity meter, a ...

Sandberg & Schneidewind

The TRAWAS Portable Water Testing Kit is a complete microbiological laboratory for testing drinking, recreational and waste water. The TRAWAS Improved Kit (No 180.104) is an improved version of the TRAWAS Basic Kit (No. 180.102) and includes a ...

Sandberg & Schneidewind

The TRAWAS Portable Water Testing Kit is a complete microbiological laboratory for testing drinking, recreational and waste water. The TRAWAS Improved Kit (No 180.106) is an improved version of the TRAWAS Basic Kit (No. 180.102) and includes a ...

Sandberg & Schneidewind

The TRAWAS Portable Water Testing Kit is a complete microbiological laboratory for testing drinking, recreational and waste water. The kit can test for the following parameters: -Coliforms -E. coli -pH -Chlorine

The kit includes step-by-step ...

Trudev

Trudev offers a kit that tests for fecal contamination of water sources using the standard indicators of total coliforms and E. coli.

Trudev uses a proprietary method of combing presence-absence and spot-count tests that does not require ...

Central Pollution Control Board (CPCB)

Water Quality Field Test Kits enable cost-effective and immediate assessment of contaminates levels in water. The main objectives of the WTK are to create mass awareness among students, NGOs and the public and to provide a low-cost water ...

<

Page 1 of 1

>